{"id":1218,"date":"2021-05-19T16:41:16","date_gmt":"2021-05-19T16:41:16","guid":{"rendered":"https:\/\/opentextbc.ca\/autodesk\/chapter\/competency-test-no-5-open-book\/"},"modified":"2021-11-05T17:29:01","modified_gmt":"2021-11-05T17:29:01","slug":"competency-test-no-5-open-book","status":"publish","type":"chapter","link":"https:\/\/opentextbc.ca\/autodesk\/chapter\/competency-test-no-5-open-book\/","title":{"raw":"Module 26 Competency Test No. 5 Open Book","rendered":"Module 26 Competency Test No. 5 Open Book"},"content":{"raw":"<div class=\"textbox textbox--learning-objectives\"><header class=\"textbox__header\">\n<p class=\"textbox__title\">Learning Outcomes<\/p>\n\n<\/header>\n<div class=\"textbox__content\">\n\nWhen you have completed this module, you will be able to:\n<ol>\n \t<li>Within a six hour time limit, complete a written exam and the lab exercise.<\/li>\n<\/ol>\n<\/div>\n<\/div>\nThe Inventor book was written with competency based modules. What that means is that you have not completed each module until you have mastered it. The Competency Test module contains multiple choice questions and a comprehensive lab exercise to test your mastery of the set of modules that you completed. There are no answers or keys supplied in a Competency Test module since it is meant to be checked by your instructor. If there are any parts of this module that you have trouble completing, you should go back and reread the module or modules containing the information that you are having trouble with. If necessary, redo as many lab exercises required until you fully understand the material.\n\nIf you are Completing this book:\n<ul>\n \t<li>Without the aid of an instructor, complete the written test and the lab exercise.<\/li>\n \t<li>In a classroom with an instructor, the instructor will give instructions on what to do after you have completed this module.<\/li>\n<\/ul>\n<h1>Multiple Choice Questions<\/h1>\nSelect the BEST answer.\n<ol>\n \t<li>What file extension does a presentation file have?\n<ol type=\"A\">\n \t<li>.ipt<\/li>\n \t<li>.idw<\/li>\n \t<li>.iam<\/li>\n \t<li>.iaf<\/li>\n \t<li>.ipn<\/li>\n<\/ol>\n<\/li>\n \t<li>What is the term used in an assembly file that refers to the part files linked to the assembly?\n<ol type=\"A\">\n \t<li>link<\/li>\n \t<li>location<\/li>\n \t<li>indicator<\/li>\n \t<li>source<\/li>\n \t<li>reference<\/li>\n<\/ol>\n<\/li>\n \t<li>What does the symbol \u201c&lt;&lt;&gt;&gt;\u201d signify in a dimension text?\n<ol type=\"A\">\n \t<li>A reference dimension.<\/li>\n \t<li>The actual dimension number is a model or drawing dimension size.<\/li>\n \t<li>The text size.<\/li>\n \t<li>The dimension units of the model or drawing dimension.<\/li>\n \t<li>That there is no dimension.<\/li>\n<\/ol>\n<\/li>\n \t<li>What is the name of first view you create on a drawing that controls the scale, orientation and location of the orthographical views projected from it?\n<ol type=\"A\">\n \t<li>Section View<\/li>\n \t<li>Multiview<\/li>\n \t<li>Projected View<\/li>\n \t<li>Base view<\/li>\n \t<li>Orthographic view<\/li>\n<\/ol>\n<\/li>\n \t<li>What command is used to get the model dimensions for a view?\n<ol type=\"A\">\n \t<li>GET DIMENSION<\/li>\n \t<li>GENERAL DIMENSION<\/li>\n \t<li>RETRIEVE DIMENSION<\/li>\n \t<li>RECOVER DIMENSION<\/li>\n \t<li>OBTAIN DIMENSION<\/li>\n<\/ol>\n<\/li>\n \t<li>What is the minimum and maximum number of drawing sheets that can exist in a single drawing file?\n<ol type=\"A\">\n \t<li>Minimum - 1 Maximum - none<\/li>\n \t<li>Minimum - 1 Maximum - 10<\/li>\n \t<li>Minimum - 0 Maximum - none<\/li>\n \t<li>Minimum - 1 Maximum - 100<\/li>\n \t<li>Minimum - 0 Maximum - 10<\/li>\n<\/ol>\n<\/li>\n \t<li>What file extension does a drawing file have?\n<ol type=\"A\">\n \t<li>.ipt<\/li>\n \t<li>.idw<\/li>\n \t<li>.iam<\/li>\n \t<li>.iaf<\/li>\n \t<li>.ipn<\/li>\n<\/ol>\n<\/li>\n \t<li>What is the method of the construction called when an assembly file is created from a series of part files that were previously created and saved in their own .IPT file?\n<ol type=\"A\">\n \t<li>Part Assembly<\/li>\n \t<li>Bottom-up Assembly<\/li>\n \t<li>IPT Assembly<\/li>\n \t<li>Top-down Assembly<\/li>\n \t<li>Series Assembly<\/li>\n<\/ol>\n<\/li>\n \t<li>What is the term used to describe the distances that the parts are moved from the grounded part in an explode assembly file?\n<ol type=\"A\">\n \t<li>Distance<\/li>\n \t<li>Exploded<\/li>\n \t<li>Trails<\/li>\n \t<li>Animation<\/li>\n \t<li>Tweak<\/li>\n<\/ol>\n<\/li>\n \t<li>What file extension does an assembly file have?\n<ol type=\"A\">\n \t<li>.ipt<\/li>\n \t<li>.idw<\/li>\n \t<li>.iam<\/li>\n \t<li>.iaf<\/li>\n \t<li>.ipn<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n<h1 class=\"page-break-before\">Lab Exercise 26-1<\/h1>\nTime allowed: 6 hours.\n<table border=\"0\">\n<tbody>\n<tr>\n<td><strong>Part Name<\/strong><\/td>\n<td><strong>Project<\/strong><\/td>\n<td><strong>Units<\/strong><\/td>\n<td><strong>Template<\/strong><\/td>\n<td><strong>Color<\/strong><\/td>\n<td><strong>Material<\/strong><\/td>\n<\/tr>\n<tr>\n<td>Inventor Lab 26-1<\/td>\n<td>Inventor Course<\/td>\n<td>Inches<\/td>\n<td>See Below<\/td>\n<td>See Below<\/td>\n<td>See Below<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Step 1<\/h2>\nCreate the following parts. Each part must have its own file and constructed as follows:\n\n<strong>A<\/strong> Project the Center Point onto the Base plane.\n<strong>B<\/strong> Select your own location for X0Y0Z0.\n<strong>C<\/strong> Draw the necessary sketches and extrude or revolve them to produce the solid models. Apply all of the necessary geometrical and dimensional constraints to maintain the objects shape and size. All sketches must be fully constrained.\n<strong>D<\/strong> Apply the colour and material shown.\n<strong>E<\/strong> Ensure that you draw each part in the correct orientation so that they can be easily assembled together. The Home view for each part will help you. (Figure Step 1A, 1B, and 1C)\n\n[caption id=\"attachment_1909\" align=\"aligncenter\" width=\"300\"]<img class=\"wp-image-1909\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1A.jpg\" alt=\"\" width=\"300\" height=\"365\"> Figure Step 1A<br>Solid Model - Home View[\/caption]\n\n[caption id=\"attachment_1910\" align=\"aligncenter\" width=\"300\"]<img class=\"wp-image-1910\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1B-e1624579298752.jpg\" alt=\"\" width=\"300\" height=\"307\"> Figure Step 1B<br>Solid Model - Orbited View[\/caption]\n\n[caption id=\"attachment_1911\" align=\"aligncenter\" width=\"500\" class=\"page-break-after\"]<a href=\"https:\/\/opentextbc.ca\/autodesk\/wp-content\/uploads\/sites\/1381\/2021\/05\/26-1-1C.jpg\"><img class=\"wp-image-1911\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1C.jpg\" alt=\"\" width=\"500\" height=\"629\"><\/a> Figure Step 1C<br>Dimensioned Multiview Drawing [Click to see image full size][\/caption]<strong>Part:<\/strong> Base\n<strong>Part Name:<\/strong> Inventor Lab 26-1A\n<strong>Template:<\/strong> English-Modules Part (in).ipt\n<strong>Color:<\/strong> Steel - Polished\n<strong>Material:<\/strong> Stainless Steel\n\n<strong>Part:<\/strong> Adjustment Shaft\n<strong>Part Name:<\/strong> Inventor Lab 26-1B\n<strong>Template:<\/strong> English-Modules Part (in).ipt\n<strong>Color:<\/strong> Brass - Satin\n<strong>Material:<\/strong> Soft Yellow Brass (Figure Step 1D, 1E, and 1F)\n\n[caption id=\"attachment_1912\" align=\"aligncenter\" width=\"89\"]<img class=\"size-full wp-image-1912\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1D.jpg\" alt=\"\" width=\"89\" height=\"380\"> Figure Step 1D<br>Solid Model -<br>Home View[\/caption]\n\n[caption id=\"attachment_1913\" align=\"aligncenter\" width=\"162\"]<img class=\"size-full wp-image-1913\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1E.jpg\" alt=\"\" width=\"162\" height=\"451\"> Figure Step 1E<br>Solid Model -<br>Orbited View[\/caption]\n\n[caption id=\"attachment_1914\" align=\"aligncenter\" width=\"444\" class=\"page-break-after\"]<img class=\"size-full wp-image-1914\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1F.jpg\" alt=\"\" width=\"444\" height=\"560\"> Figure Step 1F<br>Dimensioned Multiview Drawing[\/caption]\n\n<strong class=\"page-break-before\">Part:<\/strong> Adjusting Nut\n<strong>Part Name:<\/strong> Inventor Lab 26-1C\n<strong>Template:<\/strong> English-Modules Part (in).ipt\n<strong>Color:<\/strong> Nickel\n<strong>Material:<\/strong> Non-Alloy Steel (Figure Step 1G and 1H)\n<span style=\"color: #008000\"><strong>Note:<\/strong> <\/span>Knurl the outside of the nut.\n\n[caption id=\"attachment_1915\" align=\"aligncenter\" width=\"300\"]<img class=\"wp-image-1915\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1G-e1624579370883.jpg\" alt=\"\" width=\"300\" height=\"264\"> Figure Step 1G<br>Solid Model - Home View[\/caption]\n\n[caption id=\"attachment_1916\" align=\"aligncenter\" width=\"396\" class=\"page-break-after\"]<img class=\"size-full wp-image-1916\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1H.jpg\" alt=\"\" width=\"396\" height=\"414\"> Figure Step 1H<br>Dimensioned Multiview Drawing[\/caption]\n\n<strong class=\"page-break-before\">Part:<\/strong> V-Shaft\n<strong>Part Name:<\/strong> Inventor Lab 26-1D\n<strong>Template:<\/strong> English-Modules Part (in).ipt\n<strong>Color:<\/strong> Chrome - Polished Blue\n<strong>Material:<\/strong> Stainless Steel (Figure Step 1J and 1K)\n\n[caption id=\"attachment_1917\" align=\"aligncenter\" width=\"147\"]<img class=\"wp-image-1917 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1J-e1624579400147.jpg\" alt=\"\" width=\"147\" height=\"384\"> Figure Step 1J Solid Model - Home View[\/caption]\n\n[caption id=\"attachment_1918\" align=\"aligncenter\" width=\"400\" class=\"page-break-after\"]<img class=\"wp-image-1918\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1K.jpg\" alt=\"\" width=\"400\" height=\"481\"> Figure Step 1K<br>Dimensioned Multiview Drawing[\/caption]\n\n<strong class=\"page-break-before\">Part:<\/strong> Set Screw\n<strong>Part Name:<\/strong> Inventor Lab 26-1E\n<strong>Template:<\/strong> English-Modules Part (in).ipt\n<strong>Color:<\/strong> Steel - Polished\n<strong>Material:<\/strong> Steel (Figure Step 1L, 1M, and 1N)\n\n[caption id=\"attachment_1919\" align=\"aligncenter\" width=\"240\"]<img class=\"wp-image-1919 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1L-e1624579447417.jpg\" alt=\"\" width=\"240\" height=\"175\"> Figure Step 1L<br>Solid Model -<br>Home View[\/caption]\n\n[caption id=\"attachment_1920\" align=\"aligncenter\" width=\"221\"]<img class=\"wp-image-1920 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1M-e1624579457141.jpg\" alt=\"\" width=\"221\" height=\"173\"> Figure Step 1M<br>Solid Model -<br>Orbited View<br>Figure[\/caption]\n\n[caption id=\"attachment_1921\" align=\"aligncenter\" width=\"400\" class=\"page-break-after\"]<img class=\"wp-image-1921\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1N.jpg\" alt=\"\" width=\"400\" height=\"347\"> Figure Step 1N<br>Dimensioned Multiview Drawing[\/caption]\n\n<strong class=\"page-break-before\">Part:<\/strong> Bolt\n<strong>Part Name:<\/strong> Inventor Lab 26-1F\n<strong>Template:<\/strong> English-Modules Part (in).ipt\n<strong>Color:<\/strong> Metal-AL-6061 - Machined\n<strong>Material:<\/strong> Steel (Figure Step 1P and 1Q)\n\n[caption id=\"attachment_1922\" align=\"aligncenter\" width=\"152\"]<img class=\"wp-image-1922 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1P-e1624579485989.jpg\" alt=\"\" width=\"152\" height=\"359\"> Figure Step 1P<br>Solid Model -<br>Home View[\/caption]\n\n[caption id=\"attachment_1923\" align=\"aligncenter\" width=\"400\" class=\"page-break-after\"]<img class=\"wp-image-1923\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1Q.jpg\" alt=\"\" width=\"400\" height=\"532\"> Figure Step 1Q<br>Dimensioned Multiview Drawing[\/caption]\n\n<strong class=\"page-break-before\">Part:<\/strong> Washer\n<strong>Part Name:<\/strong> Inventor Lab 26-1G\n<strong>Template:<\/strong> English-Modules Part (in).ipt\n<strong>Color:<\/strong> Metal-AL-6061 - Machined\n<strong>Material:<\/strong> Steel (Figure Step 1R and 1S)\n\n[caption id=\"attachment_1924\" align=\"aligncenter\" width=\"278\"]<img class=\"wp-image-1924 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1R-e1624579527195.jpg\" alt=\"\" width=\"278\" height=\"176\"> Figure Step 1R<br>Solid Model -<br>Home View[\/caption]\n\n[caption id=\"attachment_1925\" align=\"aligncenter\" width=\"364\" class=\"page-break-after\"]<img class=\"size-full wp-image-1925\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1S.jpg\" alt=\"\" width=\"364\" height=\"352\"> Figure Step 1S<br>Dimensioned Multiview Drawing[\/caption]\n\n<strong class=\"page-break-before\">Part:<\/strong> Nut\n<strong>Part Name:<\/strong> Inventor Lab 26-1H\n<strong>Template:<\/strong> English-Modules Part (in).ipt\n<strong>Color:<\/strong> Metal-AL-6061 - Machined\n<strong>Material:<\/strong> Steel (Figure Step 1T and 1U)\n\n[caption id=\"attachment_1926\" align=\"aligncenter\" width=\"183\"]<img class=\"wp-image-1926 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1T-e1624579546148.jpg\" alt=\"\" width=\"183\" height=\"180\"> Figure Step 1T<br>Solid Model -<br>Home View[\/caption]\n\n[caption id=\"attachment_1927\" align=\"aligncenter\" width=\"400\"]<img class=\"wp-image-1927\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1U.jpg\" alt=\"\" width=\"400\" height=\"358\"> Figure Step 1U<br>Dimensioned Multiview Drawing<br>Competency[\/caption]\n<h2 class=\"page-break-before\">Step 2<\/h2>\nAssemble the parts that you created in Step 1 to create the Machine Jack assembly as shown in figures below. There are two washers, one above and one below the base. The washer under the base should be assembled with 0.5 inches offset from the bottom of the base. Save the assembly using the following name:\n\n<strong class=\"page-break-before\">Assembly:<\/strong> Machine Jack\n<strong>Assembly Name:<\/strong> Inventor Lab 26-2A\n<strong>Template:<\/strong> English-Modules Assembly (in).iam (Figure Step 2A and 2B)\n\n[caption id=\"attachment_1928\" align=\"aligncenter\" width=\"289\"]<img class=\"wp-image-1928 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-2A-Assembled-e1624579573892.jpg\" alt=\"\" width=\"289\" height=\"479\"> Figure Step 2A<br>Assembled Solid Model -<br>Home View[\/caption]\n\n[caption id=\"attachment_1929\" align=\"aligncenter\" width=\"266\"]<img class=\"wp-image-1929 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-2B-Assembled-e1624579587163.jpg\" alt=\"\" width=\"266\" height=\"455\"> Figure Step 2B<br>Assembled Solid Model -<br>Orbited View[\/caption]\n<h2>Step 3<\/h2>\nWith the assembly file: Inventor Lab 26-2A.iam as the active file, save a copy of it naming it: <span style=\"text-decoration: underline\">Inventor Lab 26-2B.iam<\/span>.\n<h2 class=\"page-break-before\">Step 4<\/h2>\nOpen the assembly file: Inventor Lab 26-2B.iam that you just copied. Change the colour of the Base and the Adjusting Nut in the assembly file to Clear - Blue as shown in the figures below.\n\n<strong>Assembly:<\/strong> Machine Jack\n<strong>Assembly Name:<\/strong> Inventor Lab 26-2B\n<strong>Template:<\/strong> N\/A (Figure Step 4A and 4B)\n\n[caption id=\"attachment_1930\" align=\"aligncenter\" width=\"300\"]<img class=\"wp-image-1930\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-4A-1-e1624579629171.jpg\" alt=\"\" width=\"300\" height=\"480\"> Figure Step 4A<br>Assembled Solid Model -<br>Home View[\/caption]\n\n[caption id=\"attachment_1931\" align=\"aligncenter\" width=\"300\"]<img class=\"wp-image-1931\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-4B-1.jpg\" alt=\"\" width=\"300\" height=\"411\"> Figure Step 4B<br>Assembled Solid Model -<br>Orbited View[\/caption]\n<h2 class=\"page-break-before\">Step 5<\/h2>\nCreate a presentation file using the assembly file Inventor Lab 26-2A. Tweak it to match as close as you can to Figure Step 5.\n\n[caption id=\"attachment_1932\" align=\"aligncenter\" width=\"239\"]<img class=\"size-full wp-image-1932\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-5-1-1.jpg\" alt=\"\" width=\"239\" height=\"710\"> Figure Step 5[\/caption]\n<h2>Step 6<\/h2>\nSet the animation Interval to 20 and the Repetitions to 2. Test the animation.\n\n<strong>Presentation:<\/strong> Machine Jack\n<strong>Presentation Name:<\/strong> Inventor Lab 26-2A\n<strong>Template:<\/strong> N\/A\n<h2>Step 7<\/h2>\nCreate the following drawing as follows:\n\n<strong>A<\/strong> Create one drawing file complete with two sheets as shown in Figure 4A, 4B and Figure 7A, 7B.\n<strong>B<\/strong> Create the same views shown in the drawings.\n<strong>C<\/strong> If the scale is not indicated, set it to full scale or 1:1.\n<strong>D<\/strong> Save the drawing file with the drawing name: Inventor Lab 26-1.idw Figure Step 5\n<strong>E<\/strong> Complete the titleblock in both drawings sheets.\n<p class=\"page-break-before\"><strong>Drawing Name:<\/strong> Inventor Lab 26-1.idw<\/p>\n<strong>Template:<\/strong> English-Modules Drawing ANSI (in).idw\n\n<strong>Sheet:<\/strong> 1\n<strong>Part:<\/strong> Base\n<strong>Drawing Size:<\/strong> C\n<strong>Part Name:<\/strong> Inventor Lab 26-1A.ipt (Figure Step 7A and 7B)\n\n[caption id=\"attachment_1933\" align=\"aligncenter\" width=\"500\"]<a href=\"https:\/\/opentextbc.ca\/autodesk\/wp-content\/uploads\/sites\/1381\/2021\/05\/Step-7A.jpg\"><img class=\"wp-image-1933\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-7A.jpg\" alt=\"\" width=\"500\" height=\"533\"><\/a> Figure Step 7A [Click to see image full size][\/caption][caption id=\"attachment_1934\" align=\"aligncenter\" width=\"615\" class=\"page-break-after\"]<a href=\"https:\/\/opentextbc.ca\/autodesk\/wp-content\/uploads\/sites\/1381\/2021\/05\/Step-7B.jpg\"><img class=\"wp-image-1934\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-7B.jpg\" alt=\"\" width=\"615\" height=\"477\"><\/a> Figure Step 7B [Click to see image full size][\/caption]<strong class=\"page-break-before\">Sheet:<\/strong> 2\n<strong>Part:<\/strong> Post\n<strong>Drawing Size:<\/strong> A\n<strong>Part Name:<\/strong> Inventor Lab 26-1D.ipt (Figure Step 7C and 7D)\n\n[caption id=\"attachment_1935\" align=\"aligncenter\" width=\"373\"]<img class=\"size-full wp-image-1935\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-7C.jpg\" alt=\"\" width=\"373\" height=\"558\"> Figure Step 7C[\/caption]\n\n[caption id=\"attachment_1936\" align=\"aligncenter\" width=\"457\"]<img class=\"size-full wp-image-1936\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-7D.jpg\" alt=\"\" width=\"457\" height=\"590\"> Figure Step 7D[\/caption]","rendered":"<div class=\"textbox textbox--learning-objectives\">\n<header class=\"textbox__header\">\n<p class=\"textbox__title\">Learning Outcomes<\/p>\n<\/header>\n<div class=\"textbox__content\">\n<p>When you have completed this module, you will be able to:<\/p>\n<ol>\n<li>Within a six hour time limit, complete a written exam and the lab exercise.<\/li>\n<\/ol>\n<\/div>\n<\/div>\n<p>The Inventor book was written with competency based modules. What that means is that you have not completed each module until you have mastered it. The Competency Test module contains multiple choice questions and a comprehensive lab exercise to test your mastery of the set of modules that you completed. There are no answers or keys supplied in a Competency Test module since it is meant to be checked by your instructor. If there are any parts of this module that you have trouble completing, you should go back and reread the module or modules containing the information that you are having trouble with. If necessary, redo as many lab exercises required until you fully understand the material.<\/p>\n<p>If you are Completing this book:<\/p>\n<ul>\n<li>Without the aid of an instructor, complete the written test and the lab exercise.<\/li>\n<li>In a classroom with an instructor, the instructor will give instructions on what to do after you have completed this module.<\/li>\n<\/ul>\n<h1>Multiple Choice Questions<\/h1>\n<p>Select the BEST answer.<\/p>\n<ol>\n<li>What file extension does a presentation file have?\n<ol type=\"A\">\n<li>.ipt<\/li>\n<li>.idw<\/li>\n<li>.iam<\/li>\n<li>.iaf<\/li>\n<li>.ipn<\/li>\n<\/ol>\n<\/li>\n<li>What is the term used in an assembly file that refers to the part files linked to the assembly?\n<ol type=\"A\">\n<li>link<\/li>\n<li>location<\/li>\n<li>indicator<\/li>\n<li>source<\/li>\n<li>reference<\/li>\n<\/ol>\n<\/li>\n<li>What does the symbol \u201c&lt;&lt;&gt;&gt;\u201d signify in a dimension text?\n<ol type=\"A\">\n<li>A reference dimension.<\/li>\n<li>The actual dimension number is a model or drawing dimension size.<\/li>\n<li>The text size.<\/li>\n<li>The dimension units of the model or drawing dimension.<\/li>\n<li>That there is no dimension.<\/li>\n<\/ol>\n<\/li>\n<li>What is the name of first view you create on a drawing that controls the scale, orientation and location of the orthographical views projected from it?\n<ol type=\"A\">\n<li>Section View<\/li>\n<li>Multiview<\/li>\n<li>Projected View<\/li>\n<li>Base view<\/li>\n<li>Orthographic view<\/li>\n<\/ol>\n<\/li>\n<li>What command is used to get the model dimensions for a view?\n<ol type=\"A\">\n<li>GET DIMENSION<\/li>\n<li>GENERAL DIMENSION<\/li>\n<li>RETRIEVE DIMENSION<\/li>\n<li>RECOVER DIMENSION<\/li>\n<li>OBTAIN DIMENSION<\/li>\n<\/ol>\n<\/li>\n<li>What is the minimum and maximum number of drawing sheets that can exist in a single drawing file?\n<ol type=\"A\">\n<li>Minimum &#8211; 1 Maximum &#8211; none<\/li>\n<li>Minimum &#8211; 1 Maximum &#8211; 10<\/li>\n<li>Minimum &#8211; 0 Maximum &#8211; none<\/li>\n<li>Minimum &#8211; 1 Maximum &#8211; 100<\/li>\n<li>Minimum &#8211; 0 Maximum &#8211; 10<\/li>\n<\/ol>\n<\/li>\n<li>What file extension does a drawing file have?\n<ol type=\"A\">\n<li>.ipt<\/li>\n<li>.idw<\/li>\n<li>.iam<\/li>\n<li>.iaf<\/li>\n<li>.ipn<\/li>\n<\/ol>\n<\/li>\n<li>What is the method of the construction called when an assembly file is created from a series of part files that were previously created and saved in their own .IPT file?\n<ol type=\"A\">\n<li>Part Assembly<\/li>\n<li>Bottom-up Assembly<\/li>\n<li>IPT Assembly<\/li>\n<li>Top-down Assembly<\/li>\n<li>Series Assembly<\/li>\n<\/ol>\n<\/li>\n<li>What is the term used to describe the distances that the parts are moved from the grounded part in an explode assembly file?\n<ol type=\"A\">\n<li>Distance<\/li>\n<li>Exploded<\/li>\n<li>Trails<\/li>\n<li>Animation<\/li>\n<li>Tweak<\/li>\n<\/ol>\n<\/li>\n<li>What file extension does an assembly file have?\n<ol type=\"A\">\n<li>.ipt<\/li>\n<li>.idw<\/li>\n<li>.iam<\/li>\n<li>.iaf<\/li>\n<li>.ipn<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n<h1 class=\"page-break-before\">Lab Exercise 26-1<\/h1>\n<p>Time allowed: 6 hours.<\/p>\n<table>\n<tbody>\n<tr>\n<td><strong>Part Name<\/strong><\/td>\n<td><strong>Project<\/strong><\/td>\n<td><strong>Units<\/strong><\/td>\n<td><strong>Template<\/strong><\/td>\n<td><strong>Color<\/strong><\/td>\n<td><strong>Material<\/strong><\/td>\n<\/tr>\n<tr>\n<td>Inventor Lab 26-1<\/td>\n<td>Inventor Course<\/td>\n<td>Inches<\/td>\n<td>See Below<\/td>\n<td>See Below<\/td>\n<td>See Below<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Step 1<\/h2>\n<p>Create the following parts. Each part must have its own file and constructed as follows:<\/p>\n<p><strong>A<\/strong> Project the Center Point onto the Base plane.<br \/>\n<strong>B<\/strong> Select your own location for X0Y0Z0.<br \/>\n<strong>C<\/strong> Draw the necessary sketches and extrude or revolve them to produce the solid models. Apply all of the necessary geometrical and dimensional constraints to maintain the objects shape and size. All sketches must be fully constrained.<br \/>\n<strong>D<\/strong> Apply the colour and material shown.<br \/>\n<strong>E<\/strong> Ensure that you draw each part in the correct orientation so that they can be easily assembled together. The Home view for each part will help you. (Figure Step 1A, 1B, and 1C)<\/p>\n<figure id=\"attachment_1909\" aria-describedby=\"caption-attachment-1909\" style=\"width: 300px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1909\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1A.jpg\" alt=\"\" width=\"300\" height=\"365\" \/><figcaption id=\"caption-attachment-1909\" class=\"wp-caption-text\">Figure Step 1A<br \/>Solid Model &#8211; Home View<\/figcaption><\/figure>\n<figure id=\"attachment_1910\" aria-describedby=\"caption-attachment-1910\" style=\"width: 300px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1910\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1B-e1624579298752.jpg\" alt=\"\" width=\"300\" height=\"307\" \/><figcaption id=\"caption-attachment-1910\" class=\"wp-caption-text\">Figure Step 1B<br \/>Solid Model &#8211; Orbited View<\/figcaption><\/figure>\n<figure id=\"attachment_1911\" aria-describedby=\"caption-attachment-1911\" style=\"width: 500px\" class=\"wp-caption aligncenter page-break-after\"><a href=\"https:\/\/opentextbc.ca\/autodesk\/wp-content\/uploads\/sites\/1381\/2021\/05\/26-1-1C.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1911\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1C.jpg\" alt=\"\" width=\"500\" height=\"629\" \/><\/a><figcaption id=\"caption-attachment-1911\" class=\"wp-caption-text\">Figure Step 1C<br \/>Dimensioned Multiview Drawing [Click to see image full size]<\/figcaption><\/figure>\n<p><strong>Part:<\/strong> Base<br \/>\n<strong>Part Name:<\/strong> Inventor Lab 26-1A<br \/>\n<strong>Template:<\/strong> English-Modules Part (in).ipt<br \/>\n<strong>Color:<\/strong> Steel &#8211; Polished<br \/>\n<strong>Material:<\/strong> Stainless Steel<\/p>\n<p><strong>Part:<\/strong> Adjustment Shaft<br \/>\n<strong>Part Name:<\/strong> Inventor Lab 26-1B<br \/>\n<strong>Template:<\/strong> English-Modules Part (in).ipt<br \/>\n<strong>Color:<\/strong> Brass &#8211; Satin<br \/>\n<strong>Material:<\/strong> Soft Yellow Brass (Figure Step 1D, 1E, and 1F)<\/p>\n<figure id=\"attachment_1912\" aria-describedby=\"caption-attachment-1912\" style=\"width: 89px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-1912\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1D.jpg\" alt=\"\" width=\"89\" height=\"380\" \/><figcaption id=\"caption-attachment-1912\" class=\"wp-caption-text\">Figure Step 1D<br \/>Solid Model &#8211;<br \/>Home View<\/figcaption><\/figure>\n<figure id=\"attachment_1913\" aria-describedby=\"caption-attachment-1913\" style=\"width: 162px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-1913\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1E.jpg\" alt=\"\" width=\"162\" height=\"451\" \/><figcaption id=\"caption-attachment-1913\" class=\"wp-caption-text\">Figure Step 1E<br \/>Solid Model &#8211;<br \/>Orbited View<\/figcaption><\/figure>\n<figure id=\"attachment_1914\" aria-describedby=\"caption-attachment-1914\" style=\"width: 444px\" class=\"wp-caption aligncenter page-break-after\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-1914\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1F.jpg\" alt=\"\" width=\"444\" height=\"560\" \/><figcaption id=\"caption-attachment-1914\" class=\"wp-caption-text\">Figure Step 1F<br \/>Dimensioned Multiview Drawing<\/figcaption><\/figure>\n<p><strong class=\"page-break-before\">Part:<\/strong> Adjusting Nut<br \/>\n<strong>Part Name:<\/strong> Inventor Lab 26-1C<br \/>\n<strong>Template:<\/strong> English-Modules Part (in).ipt<br \/>\n<strong>Color:<\/strong> Nickel<br \/>\n<strong>Material:<\/strong> Non-Alloy Steel (Figure Step 1G and 1H)<br \/>\n<span style=\"color: #008000\"><strong>Note:<\/strong> <\/span>Knurl the outside of the nut.<\/p>\n<figure id=\"attachment_1915\" aria-describedby=\"caption-attachment-1915\" style=\"width: 300px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1915\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1G-e1624579370883.jpg\" alt=\"\" width=\"300\" height=\"264\" \/><figcaption id=\"caption-attachment-1915\" class=\"wp-caption-text\">Figure Step 1G<br \/>Solid Model &#8211; Home View<\/figcaption><\/figure>\n<figure id=\"attachment_1916\" aria-describedby=\"caption-attachment-1916\" style=\"width: 396px\" class=\"wp-caption aligncenter page-break-after\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-1916\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1H.jpg\" alt=\"\" width=\"396\" height=\"414\" \/><figcaption id=\"caption-attachment-1916\" class=\"wp-caption-text\">Figure Step 1H<br \/>Dimensioned Multiview Drawing<\/figcaption><\/figure>\n<p><strong class=\"page-break-before\">Part:<\/strong> V-Shaft<br \/>\n<strong>Part Name:<\/strong> Inventor Lab 26-1D<br \/>\n<strong>Template:<\/strong> English-Modules Part (in).ipt<br \/>\n<strong>Color:<\/strong> Chrome &#8211; Polished Blue<br \/>\n<strong>Material:<\/strong> Stainless Steel (Figure Step 1J and 1K)<\/p>\n<figure id=\"attachment_1917\" aria-describedby=\"caption-attachment-1917\" style=\"width: 147px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1917 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1J-e1624579400147.jpg\" alt=\"\" width=\"147\" height=\"384\" \/><figcaption id=\"caption-attachment-1917\" class=\"wp-caption-text\">Figure Step 1J Solid Model &#8211; Home View<\/figcaption><\/figure>\n<figure id=\"attachment_1918\" aria-describedby=\"caption-attachment-1918\" style=\"width: 400px\" class=\"wp-caption aligncenter page-break-after\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1918\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1K.jpg\" alt=\"\" width=\"400\" height=\"481\" \/><figcaption id=\"caption-attachment-1918\" class=\"wp-caption-text\">Figure Step 1K<br \/>Dimensioned Multiview Drawing<\/figcaption><\/figure>\n<p><strong class=\"page-break-before\">Part:<\/strong> Set Screw<br \/>\n<strong>Part Name:<\/strong> Inventor Lab 26-1E<br \/>\n<strong>Template:<\/strong> English-Modules Part (in).ipt<br \/>\n<strong>Color:<\/strong> Steel &#8211; Polished<br \/>\n<strong>Material:<\/strong> Steel (Figure Step 1L, 1M, and 1N)<\/p>\n<figure id=\"attachment_1919\" aria-describedby=\"caption-attachment-1919\" style=\"width: 240px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1919 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1L-e1624579447417.jpg\" alt=\"\" width=\"240\" height=\"175\" \/><figcaption id=\"caption-attachment-1919\" class=\"wp-caption-text\">Figure Step 1L<br \/>Solid Model &#8211;<br \/>Home View<\/figcaption><\/figure>\n<figure id=\"attachment_1920\" aria-describedby=\"caption-attachment-1920\" style=\"width: 221px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1920 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1M-e1624579457141.jpg\" alt=\"\" width=\"221\" height=\"173\" \/><figcaption id=\"caption-attachment-1920\" class=\"wp-caption-text\">Figure Step 1M<br \/>Solid Model &#8211;<br \/>Orbited View<br \/>Figure<\/figcaption><\/figure>\n<figure id=\"attachment_1921\" aria-describedby=\"caption-attachment-1921\" style=\"width: 400px\" class=\"wp-caption aligncenter page-break-after\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1921\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1N.jpg\" alt=\"\" width=\"400\" height=\"347\" \/><figcaption id=\"caption-attachment-1921\" class=\"wp-caption-text\">Figure Step 1N<br \/>Dimensioned Multiview Drawing<\/figcaption><\/figure>\n<p><strong class=\"page-break-before\">Part:<\/strong> Bolt<br \/>\n<strong>Part Name:<\/strong> Inventor Lab 26-1F<br \/>\n<strong>Template:<\/strong> English-Modules Part (in).ipt<br \/>\n<strong>Color:<\/strong> Metal-AL-6061 &#8211; Machined<br \/>\n<strong>Material:<\/strong> Steel (Figure Step 1P and 1Q)<\/p>\n<figure id=\"attachment_1922\" aria-describedby=\"caption-attachment-1922\" style=\"width: 152px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1922 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1P-e1624579485989.jpg\" alt=\"\" width=\"152\" height=\"359\" \/><figcaption id=\"caption-attachment-1922\" class=\"wp-caption-text\">Figure Step 1P<br \/>Solid Model &#8211;<br \/>Home View<\/figcaption><\/figure>\n<figure id=\"attachment_1923\" aria-describedby=\"caption-attachment-1923\" style=\"width: 400px\" class=\"wp-caption aligncenter page-break-after\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1923\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1Q.jpg\" alt=\"\" width=\"400\" height=\"532\" \/><figcaption id=\"caption-attachment-1923\" class=\"wp-caption-text\">Figure Step 1Q<br \/>Dimensioned Multiview Drawing<\/figcaption><\/figure>\n<p><strong class=\"page-break-before\">Part:<\/strong> Washer<br \/>\n<strong>Part Name:<\/strong> Inventor Lab 26-1G<br \/>\n<strong>Template:<\/strong> English-Modules Part (in).ipt<br \/>\n<strong>Color:<\/strong> Metal-AL-6061 &#8211; Machined<br \/>\n<strong>Material:<\/strong> Steel (Figure Step 1R and 1S)<\/p>\n<figure id=\"attachment_1924\" aria-describedby=\"caption-attachment-1924\" style=\"width: 278px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1924 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1R-e1624579527195.jpg\" alt=\"\" width=\"278\" height=\"176\" \/><figcaption id=\"caption-attachment-1924\" class=\"wp-caption-text\">Figure Step 1R<br \/>Solid Model &#8211;<br \/>Home View<\/figcaption><\/figure>\n<figure id=\"attachment_1925\" aria-describedby=\"caption-attachment-1925\" style=\"width: 364px\" class=\"wp-caption aligncenter page-break-after\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-1925\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1S.jpg\" alt=\"\" width=\"364\" height=\"352\" \/><figcaption id=\"caption-attachment-1925\" class=\"wp-caption-text\">Figure Step 1S<br \/>Dimensioned Multiview Drawing<\/figcaption><\/figure>\n<p><strong class=\"page-break-before\">Part:<\/strong> Nut<br \/>\n<strong>Part Name:<\/strong> Inventor Lab 26-1H<br \/>\n<strong>Template:<\/strong> English-Modules Part (in).ipt<br \/>\n<strong>Color:<\/strong> Metal-AL-6061 &#8211; Machined<br \/>\n<strong>Material:<\/strong> Steel (Figure Step 1T and 1U)<\/p>\n<figure id=\"attachment_1926\" aria-describedby=\"caption-attachment-1926\" style=\"width: 183px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1926 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1T-e1624579546148.jpg\" alt=\"\" width=\"183\" height=\"180\" \/><figcaption id=\"caption-attachment-1926\" class=\"wp-caption-text\">Figure Step 1T<br \/>Solid Model &#8211;<br \/>Home View<\/figcaption><\/figure>\n<figure id=\"attachment_1927\" aria-describedby=\"caption-attachment-1927\" style=\"width: 400px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1927\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/26-1-1U.jpg\" alt=\"\" width=\"400\" height=\"358\" \/><figcaption id=\"caption-attachment-1927\" class=\"wp-caption-text\">Figure Step 1U<br \/>Dimensioned Multiview Drawing<br \/>Competency<\/figcaption><\/figure>\n<h2 class=\"page-break-before\">Step 2<\/h2>\n<p>Assemble the parts that you created in Step 1 to create the Machine Jack assembly as shown in figures below. There are two washers, one above and one below the base. The washer under the base should be assembled with 0.5 inches offset from the bottom of the base. Save the assembly using the following name:<\/p>\n<p><strong class=\"page-break-before\">Assembly:<\/strong> Machine Jack<br \/>\n<strong>Assembly Name:<\/strong> Inventor Lab 26-2A<br \/>\n<strong>Template:<\/strong> English-Modules Assembly (in).iam (Figure Step 2A and 2B)<\/p>\n<figure id=\"attachment_1928\" aria-describedby=\"caption-attachment-1928\" style=\"width: 289px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1928 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-2A-Assembled-e1624579573892.jpg\" alt=\"\" width=\"289\" height=\"479\" \/><figcaption id=\"caption-attachment-1928\" class=\"wp-caption-text\">Figure Step 2A<br \/>Assembled Solid Model &#8211;<br \/>Home View<\/figcaption><\/figure>\n<figure id=\"attachment_1929\" aria-describedby=\"caption-attachment-1929\" style=\"width: 266px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1929 size-full\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-2B-Assembled-e1624579587163.jpg\" alt=\"\" width=\"266\" height=\"455\" \/><figcaption id=\"caption-attachment-1929\" class=\"wp-caption-text\">Figure Step 2B<br \/>Assembled Solid Model &#8211;<br \/>Orbited View<\/figcaption><\/figure>\n<h2>Step 3<\/h2>\n<p>With the assembly file: Inventor Lab 26-2A.iam as the active file, save a copy of it naming it: <span style=\"text-decoration: underline\">Inventor Lab 26-2B.iam<\/span>.<\/p>\n<h2 class=\"page-break-before\">Step 4<\/h2>\n<p>Open the assembly file: Inventor Lab 26-2B.iam that you just copied. Change the colour of the Base and the Adjusting Nut in the assembly file to Clear &#8211; Blue as shown in the figures below.<\/p>\n<p><strong>Assembly:<\/strong> Machine Jack<br \/>\n<strong>Assembly Name:<\/strong> Inventor Lab 26-2B<br \/>\n<strong>Template:<\/strong> N\/A (Figure Step 4A and 4B)<\/p>\n<figure id=\"attachment_1930\" aria-describedby=\"caption-attachment-1930\" style=\"width: 300px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1930\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-4A-1-e1624579629171.jpg\" alt=\"\" width=\"300\" height=\"480\" \/><figcaption id=\"caption-attachment-1930\" class=\"wp-caption-text\">Figure Step 4A<br \/>Assembled Solid Model &#8211;<br \/>Home View<\/figcaption><\/figure>\n<figure id=\"attachment_1931\" aria-describedby=\"caption-attachment-1931\" style=\"width: 300px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1931\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-4B-1.jpg\" alt=\"\" width=\"300\" height=\"411\" \/><figcaption id=\"caption-attachment-1931\" class=\"wp-caption-text\">Figure Step 4B<br \/>Assembled Solid Model &#8211;<br \/>Orbited View<\/figcaption><\/figure>\n<h2 class=\"page-break-before\">Step 5<\/h2>\n<p>Create a presentation file using the assembly file Inventor Lab 26-2A. Tweak it to match as close as you can to Figure Step 5.<\/p>\n<figure id=\"attachment_1932\" aria-describedby=\"caption-attachment-1932\" style=\"width: 239px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-1932\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-5-1-1.jpg\" alt=\"\" width=\"239\" height=\"710\" \/><figcaption id=\"caption-attachment-1932\" class=\"wp-caption-text\">Figure Step 5<\/figcaption><\/figure>\n<h2>Step 6<\/h2>\n<p>Set the animation Interval to 20 and the Repetitions to 2. Test the animation.<\/p>\n<p><strong>Presentation:<\/strong> Machine Jack<br \/>\n<strong>Presentation Name:<\/strong> Inventor Lab 26-2A<br \/>\n<strong>Template:<\/strong> N\/A<\/p>\n<h2>Step 7<\/h2>\n<p>Create the following drawing as follows:<\/p>\n<p><strong>A<\/strong> Create one drawing file complete with two sheets as shown in Figure 4A, 4B and Figure 7A, 7B.<br \/>\n<strong>B<\/strong> Create the same views shown in the drawings.<br \/>\n<strong>C<\/strong> If the scale is not indicated, set it to full scale or 1:1.<br \/>\n<strong>D<\/strong> Save the drawing file with the drawing name: Inventor Lab 26-1.idw Figure Step 5<br \/>\n<strong>E<\/strong> Complete the titleblock in both drawings sheets.<\/p>\n<p class=\"page-break-before\"><strong>Drawing Name:<\/strong> Inventor Lab 26-1.idw<\/p>\n<p><strong>Template:<\/strong> English-Modules Drawing ANSI (in).idw<\/p>\n<p><strong>Sheet:<\/strong> 1<br \/>\n<strong>Part:<\/strong> Base<br \/>\n<strong>Drawing Size:<\/strong> C<br \/>\n<strong>Part Name:<\/strong> Inventor Lab 26-1A.ipt (Figure Step 7A and 7B)<\/p>\n<figure id=\"attachment_1933\" aria-describedby=\"caption-attachment-1933\" style=\"width: 500px\" class=\"wp-caption aligncenter\"><a href=\"https:\/\/opentextbc.ca\/autodesk\/wp-content\/uploads\/sites\/1381\/2021\/05\/Step-7A.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1933\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-7A.jpg\" alt=\"\" width=\"500\" height=\"533\" \/><\/a><figcaption id=\"caption-attachment-1933\" class=\"wp-caption-text\">Figure Step 7A [Click to see image full size]<\/figcaption><\/figure>\n<figure id=\"attachment_1934\" aria-describedby=\"caption-attachment-1934\" style=\"width: 615px\" class=\"wp-caption aligncenter page-break-after\"><a href=\"https:\/\/opentextbc.ca\/autodesk\/wp-content\/uploads\/sites\/1381\/2021\/05\/Step-7B.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-1934\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-7B.jpg\" alt=\"\" width=\"615\" height=\"477\" \/><\/a><figcaption id=\"caption-attachment-1934\" class=\"wp-caption-text\">Figure Step 7B [Click to see image full size]<\/figcaption><\/figure>\n<p><strong class=\"page-break-before\">Sheet:<\/strong> 2<br \/>\n<strong>Part:<\/strong> Post<br \/>\n<strong>Drawing Size:<\/strong> A<br \/>\n<strong>Part Name:<\/strong> Inventor Lab 26-1D.ipt (Figure Step 7C and 7D)<\/p>\n<figure id=\"attachment_1935\" aria-describedby=\"caption-attachment-1935\" style=\"width: 373px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-1935\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-7C.jpg\" alt=\"\" width=\"373\" height=\"558\" \/><figcaption id=\"caption-attachment-1935\" class=\"wp-caption-text\">Figure Step 7C<\/figcaption><\/figure>\n<figure id=\"attachment_1936\" aria-describedby=\"caption-attachment-1936\" style=\"width: 457px\" class=\"wp-caption aligncenter\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-1936\" src=\"https:\/\/opentextbc.ca\/ethicsinlawenforcement\/wp-content\/uploads\/sites\/377\/2021\/05\/Step-7D.jpg\" alt=\"\" width=\"457\" height=\"590\" \/><figcaption id=\"caption-attachment-1936\" class=\"wp-caption-text\">Figure Step 7D<\/figcaption><\/figure>\n","protected":false},"author":127,"menu_order":5,"template":"","meta":{"pb_show_title":"on","pb_short_title":"","pb_subtitle":"","pb_authors":[],"pb_section_license":""},"chapter-type":[],"contributor":[],"license":[],"class_list":["post-1218","chapter","type-chapter","status-publish","hentry"],"part":935,"_links":{"self":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapters\/1218","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapters"}],"about":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/wp\/v2\/types\/chapter"}],"author":[{"embeddable":true,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/wp\/v2\/users\/127"}],"version-history":[{"count":1,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapters\/1218\/revisions"}],"predecessor-version":[{"id":1219,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapters\/1218\/revisions\/1219"}],"part":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/parts\/935"}],"metadata":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapters\/1218\/metadata\/"}],"wp:attachment":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/wp\/v2\/media?parent=1218"}],"wp:term":[{"taxonomy":"chapter-type","embeddable":true,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapter-type?post=1218"},{"taxonomy":"contributor","embeddable":true,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/wp\/v2\/contributor?post=1218"},{"taxonomy":"license","embeddable":true,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/wp\/v2\/license?post=1218"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}