{"id":98,"date":"2021-05-08T13:30:48","date_gmt":"2021-05-08T13:30:48","guid":{"rendered":"https:\/\/opentextbc.ca\/autodesk\/chapter\/inventors-user-interface\/"},"modified":"2021-11-05T17:25:06","modified_gmt":"2021-11-05T17:25:06","slug":"inventors-user-interface","status":"publish","type":"chapter","link":"https:\/\/opentextbc.ca\/autodesk\/chapter\/inventors-user-interface\/","title":{"raw":"Module 2 Inventor\u2019s User Interface","rendered":"Module 2 Inventor\u2019s User Interface"},"content":{"raw":"
\n

Learning Outcomes<\/p>\n\n<\/header>\n

\n\nWhen you have completed this module, you will be able to:\n
    \n \t
  1. Describe template files, part files, sketches, and 3D solid models.<\/li>\n \t
  2. Describe and configure Inventor\u2019s user interface, its menus, and use of the mouse.<\/li>\n \t
  3. Apply the NEW, SAVE, and CLOSE commands to create a new part file using a template plus name, save, and close a file.<\/li>\n<\/ol>\n<\/div>\n<\/div>\n

    Inventor\u2019s Graphic Window<\/h1>\nWhen a file is active, Inventor will display the Graphic window. The Graphic window has two different modes, the Sketch mode and the Model mode. The Sketch mode<\/span> <\/em>is used to create and edit 2D sketches that are then extruded or revolved to create 3D solid models. The Model mode <\/em><\/span>is used to view, manipulate and modify 3D solid models. You can switch between these two modes to construct or edit and create the solid model. The mode that is currently displayed is called the current mode. The Model mode must be the current mode to save the file.\n

    A 3D Solid Model<\/h2>\nA 3D solid model<\/span><\/em>, Figure 2-1, is the best possible computerized representation of a real object. A solid model can be colored or rendered plus the mass properties can be obtained from it. Mass properties are attributes such as volume, weight, surface area, moments of inertia, and centre of gravity. They are taught in Module 20.\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"300\"]\"\" Figure 2-1
    A 3D Solid Model[\/caption]\n

    An Inventor File<\/h2>\nRegardless of the type of files that are created using Inventor, they are called files as compared to files created on a CAD system which are typically called drawings. A file<\/span> <\/em>can be a 3D solid model (called a part), an assembly, a presentation, or a drawing created in Inventor and saved in digital format. The four types of files, taught in this book, that Inventor can create and save are part files, assembly files, presentation files, and drawing files.\n

    A Part File<\/h2>\nA part<\/span> <\/em>file is one 3D solid model. A part file has the file extension .ipt which is an acronym for Inventor ParT. A part file can be used on its own, used to create a working drawing, used as part of an assembly file, or used as part of a presentation file. Assembly and presentation files are taught in Module 21 to Module 26.\n

    Starting a New File<\/h2>\nA new file is started using the NEW command. The NEW command forces you to select the template file that will be used to create the new file. Every new Inventor file must be created from an existing template file. The file currently being editing in Inventor is called the current file <\/em><\/span>or sometimes the active file<\/em><\/span>.\n

    Templates<\/h2>\nA template<\/span> <\/em>file is simply an Inventor file, set with the desired parameters by its creator, named, and saved. As part of the Inventor book there are two distinct sets of templates provided. One set is in english units and the other set is in metric units. The English templates use the base unit of inches and the metric templates use the base unit of millimeters. Template files can also contain modelling objects so that several similar parts can easily be started from a common pre-built unit.\n

    Saving Files<\/h2>\nInventor keeps the current file in RAM memory. If the computer cashes or the power fails while the operator is working on a file, all the work on the file, since the last time it was saved, will be lost. When the file is saved it saves the current file that is in RAM memory onto the disk drive.\n\nEnsure that the current file is saved frequently to avoid losing production time. You should get into the habit of saving the current file every 5 to 10 minutes.\n
    \n

    Inventor Command:\u00a0 NEW<\/p>\n\n<\/header>\n

    \n\nThe NEW command is used to start a new file.\n\n\"\"\n\n<\/div>\n<\/div>\n
    \n

    Inventor Command:\u00a0SAVE<\/p>\n\n<\/header>\n

    \n\nThe SAVE command is used to save the current file from RAM memory onto the disk drive.\n\nShortcut: CTRL-S<\/strong>\n\n\"\"\n\n<\/div>\n<\/div>\n
    \n

    Inventor Command: CLOSE<\/p>\n\n<\/header>\n

    \n\nThe CLOSE command is used to close the current file.\n\nShortcut: None<\/strong>\n\n\"\"\n\n<\/div>\n<\/div>\n

    Inventor\u2019s Menus<\/h2>\nInventor has many different menus that are used by you to give instructions to Inventor while constructing and editing files. The Inventor menus taught in the Inventor book are the Pull-down menu, the Ribbon menu, the Quick Access toolbar, the Browser bar, and the Right-click menu.\n

    Inventor's Pull-Down Menu<\/h2>\nTo pull down Inventor's Pull-down menu, click the File tab. If the pull down menu item has a small solid triangle at the end, it has a flyout<\/span> <\/em>menu associated with it. If you move the cursor on the triangle, the flyout menu will display. See Figure 2-2.\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"428\"]\"\" Figure 2-2
    The Pull-Down Menu[\/caption]\n

    Ribbon Menu<\/h2>\nThe Ribbon menu is used for most of your work in Inventor. See Figure 2-3.\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"748\"]\"\" Figure 2-3
    A Typical Ribbon Menu[\/caption]\n

    Browser Bar<\/h2>\nThe Browser bar <\/em><\/span>displays the hierarchical structure of the model or assembly of the current file. It is your most important and most-used tool to create and modify objects within files. The Browser bar will be taught in more detail in future modules. It is normally docked on the left side of the Graphic window. See Figure 2-4.\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"130\"]\"\" Figure 2-4
    Browser Bar[\/caption]\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"385\"]\"\" Figure 2-5 Right-click Menu[\/caption]\n

    Right-Click Menu<\/h2>\nWhen the right mouse button is clicked, it displays the Right-click menu<\/em><\/span>. See Figure 2-5. It is sometimes called the Cursor menu <\/em><\/span>since it displays at the current location of the cursor. This menu changes automatically depending on the current command or operation being performed. It usually takes the new user a bit of time to get used to using this menu.\n

    Status Bar<\/h2>\nThe Status<\/span> bar<\/span><\/em> is permanently located along the bottom of the Graphic window. It displays the prompts that the current command is issuing, as shown in Figure 2-6, as well as the coordinate locations, as shown in Figure 2-7. These prompts help you understand what information Inventor requires and the cursor location, length, and angle in the current command.\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"303\"]\"\" Figure 2-6\u00a0 Status Bar - Showing a Command
    Prompt.[\/caption]\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"297\"]\"\" Figure 2-7 Status Bar - Showing Coordinate
    Information[\/caption]\n

    The Graphic Cursor<\/h2>\nThe Graphic cursor <\/em><\/span>is used to select menu items or objects on the sketch or model. See Figure 2-8.\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"138\"]\"\" Figure 2-8
    The Graphic Cursor[\/caption]\n

    Dialogue Boxes<\/h2>\nInventor commands use many different dialogue boxes to obtain information to be used by the command or current operation. A typical dialogue box is shown in Figure 2-9.\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"269\"]\"\" Figure 2-9 A Typical Dialogue Box[\/caption]\n

    The Mouse<\/h2>\nInventor is programed to use the three buttons on the mouse as follows:\n\nLeft Button:\u00a0 <\/strong>This is the pick button. Use it to pick objects, pick menu items, or select locations on the sketch or model.\n\nMiddle Button:\u00a0 <\/strong>The middle button or the wheel is used to zoom and pan around the Graphic window. This will be discussed in detail in Module 3.\n\nRight Button:\u00a0 <\/strong>The right button displays the Right-click menu. See Figure 2-10. The Right-click menu will change depending on the current command or operation being preformed. It is a very helpful menu and should be used as often as possible when working in Inventor.\n

    Inventor Commands<\/h2>\nAn Inventor command<\/span> <\/em>is an instruction from you to Inventor instructing it what operation to perform. Commands can be entered by selecting an item from a Pull-down menu, a Right-click menu, an icon on a Toolbar, an item on the Panel menu, or entering a shortcut on the keyboard. Since there are usually many different ways of entering the same command, you should select the method that works the best for you. There is no right or wrong way to enter a command. You should experiment to find the fastest method to improve your drawing speed and productivity.\n

    Ending the Current Command<\/h2>\nWhen you enter a command, it becomes the current command <\/em><\/span>or sometimes called the active command<\/span><\/em>. Inventor must be instructed to end the current command. There are two methods available to do this. The first is to press the Esc key on the keyboard and the second is click to Done or Cancel on the Right-click menu as shown in Figure 2-10.\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"242\"]\"\" Figure 2-10 Ending a Command[\/caption]\n

    Undo and Redo Commands<\/h2>\nIn the current file, any Inventor command or commands can be undone to reverse any changes that they may have made. To do this, click the Undo icon in the Quick Access toolbar as shown in Figure 2-11. Each click will undo the previous step. If the Undo icon was used to undo a command or a series of commands, it can be reversed by clicking the Redo icon. See Figure 2-12.\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"150\"]\"\" Fig 2-11 Undo Icon[\/caption]\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"150\"]\"\" Fig 2-11 Redo Icon[\/caption]\n

    WORK ALONG: Creating and Saving a Part File<\/h1>\n

    Step 1<\/h2>\nStart Inventor and check the current project. If required, set it to Inventor Course. (Figure Step 1)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"431\"]\"\" Figure Step 1[\/caption]\n

    Step 2<\/h2>\nClick the NEW command icon in the upper left corner of the screen or under the File tab. In the Create New File dialogue box, enable the folder: Templates - English<\/span>. (Figure Step 2A and 2B)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"61\"]\"\" Figure Step 2A[\/caption]\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"599\"]\"\" Figure Step 2B[\/caption]\n\n
    AUTHOR'S COMMENTS: <\/strong>If the Create New File dialogue box does not display template files where all the names begin with Modules (i.e. Modules Part (in).ipt), stop this workalong and go back and redo Module 1.<\/div>\n

    Step 3<\/h2>\nSelect the template: Modules Part (in).ipt<\/span> icon and click OK. (Figure Step 3)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"48\"]\"\" Figure Step 3[\/caption]\n

    Step 4<\/h2>\nInventor will display the Graphic window, in Sketch mode, as shown in the figure. (Figure Step 4)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"615\"]\"\"<\/a> Figure Step 4 [Click to see image full size][\/caption]\n

    Step 5<\/h2>\nClick the Finish Sketch icon to change to Model mode. (Figure Step 5A and 5B)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"150\"]\"\" Figure Step 5A[\/caption]\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"615\"]\"\"<\/a> Figure Step 5B [Click to see image full size][\/caption]\n

    Step 6<\/h2>\nClick the Save icon. It will open the Save As dialogue box. In the File name: box, enter the name: Inventor Workalong 02-1<\/span> and click Save. (Figure Step 6A and 6B)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"149\"]\"\" Figure Step 6A[\/caption]\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"500\"]\"\"<\/a> Figure Step 6B [Click to see image full size][\/caption]\n
    AUTHOR'S COMMENTS: <\/strong>Ensure that the Save in: box displays the folder Lab Exercises. If it does not, check to ensure that the current project is set to Inventor Course<\/div>\n

    Step 7<\/h2>\nThe file name should now display on top bar of the Graphic window similar to what is shown in the figure. (Figure Step 7)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"527\"]\"\" Figure Step 7[\/caption]\n

    Step 8<\/h2>\nClick the File <\/em>tab and then the Close <\/em>icon to close the current part file. (Figure Step 8)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"147\"]\"\" Figure Step 8[\/caption]\n

    Step 9<\/h2>\nClick the Inventor icon to pull down the menu. On the Pull-down menu, click Exit Autodesk Inventor Professional <\/em>to exit Inventor. (Figure Step 9)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"432\"]\"\" Figure Step 9[\/caption]\n

    WORK ALONG: Configuring and Working with Inventor's Interface<\/h1>\n

    Step 1<\/h2>\nStart Inventor and check the current project. If required, set it to Inventor Course.\n

    Step 2<\/h2>\nClick the New icon. In the New File dialogue box, enable the folder: Metric Templates<\/span>.\n

    Step 3<\/h2>\nSelect the template: Module Part (mm).ipt<\/span>. (Figure Step 3)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"119\"]\"\" Figure Step 3[\/caption]\n\n
    AUTHOR'S COMMENTS:\u00a0<\/strong>The units for this part are millimeters.<\/div>\n

    Step 4<\/h2>\nClick Finish Sketch to exit Sketch mode. While in Model mode, save the part file with the name: Inventor Workalong 02-2<\/span>. (Figure Step 4)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"615\"]\"\"<\/a> Figure Step 4 [Click to see image full size][\/caption]\n
    AUTHOR'S COMMENTS:\u00a0<\/strong>You must be in Model mode to save the current part file.<\/div>\n

    Step 5<\/h2>\nMove the cursor onto the space between the plus (+) sign and the magnifying glass at the top of the Browser bar and press and hold the left mouse button down. While holding the button down, drag the Browser bar into the Graphic window. The Graphic window should appear similar to the figure. (Figure Step 5)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"615\"]\"\"<\/a> Figure Step 5 [Click to see image full size][\/caption]\n
    AUTHOR'S COMMENTS:\u00a0<\/strong>I had you do Step 5 to show you how to undock and move the Browser bar onto the Graphic window. When you do this, it is called a floating menu. When it is attached to one of the four sides, it is called a docked menu.<\/div>\n
    USER TIP: <\/strong>The Status bar displays Inventor prompts to the you. Watch it closely as it will display what information the current command is looking for from you or coordinate information of the current cursor location.<\/div>\n

    Step 6<\/h2>\nMove the cursor onto the space between the plus (+) sign and the magnifying glass at the top of the Browser bar and press and hold the left mouse button down. While holding the button down, drag the Browser bar to the left until its colors fade. Release the left mouse button and the browser bar will dock on the left edge of the screen. (Figure Step 6)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"615\"]\"\"<\/a> Figure Step 6 [Click to see image full size][\/caption]\n
    AUTHOR'S COMMENTS:\u00a0 <\/strong>You may have to practice docking and undocking the menu and moving them around the Graphic window until you get comfortable doing it. The Graphic window configuration shown in Figure Step 6 is the one I use when working in Inventor. I suggest thatyou use it while working on the workalongs and lab exercises in the Inventor book.<\/div>\n
    \n\nMUST KNOW: <\/strong>Either the Esc key on the keyboard or the Cancel on the Right-click menu must be used to end the current command. You must always let Inventor know when to terminate the current command.\n\n\"\"\n\n<\/div>\n

    Step 7<\/h2>\nClick Sketch1 in the Browser bar to select it and right click the mouse. In the Right-click menu, click Edit Sketch. (Figure Step 7)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"300\"]\"\" Figure Step 7[\/caption]\n

    Step 8<\/h2>\nThe Graphic window will change to Sketch mode and should appear similar to the figure. (Figure step 8)\n\n[caption id=\"attachment_95\" align=\"aligncenter\" width=\"615\"]\"\"<\/a> Figure Step 8 [Click to see image full size][\/caption]\n

    Step 9<\/h2>\nChange to Model mode. Save and close the part file.\n
    \n\nMUST KNOW: <\/strong>The Browser bar displays the hierarchical structure of the model or assembly of the current file. It is your most important and most-used tool to create and modify files.\n\n\"\"\n\n<\/div>\n
    MUST KNOW: <\/strong>A part file is one 3D solid model. A part file has the file extension .ipt. The extension .ipt is an acronym for Inventor ParT. Working drawings can be created from the part file or part of an assembly or presentation file.<\/div>\n

    Key Principles<\/h1>\n
    \n

    Key Principles in Module 2<\/p>\n\n<\/header>\n

    \n
      \n \t
    1. When a file is active, Inventor will display the Graphic window. The Graphic window has two different modes, the Sketch mode and the Model mode. They are used to create 3D solid models, called<\/li>\n \t
    2. A part file is one 3D solid model. A part file has the file extension .ipt. The file extension .ipt is an acronym for Inventor ParT. Working drawings can be created from the part file or part of an assembly or presentation file.<\/li>\n \t
    3. Every new Inventor file must be created from an existing template<\/li>\n \t
    4. Inventor keeps the current file in RAM memory. If the computer cashes or the power fails, all the work on the file, since the last time it was saved, will be lost. When the file is saved, Inventor saves what is in RAM memory onto the disk drive. Ensure that the current file is saved frequently to avoid losing production Saving it every 5 to 10 minutes is a good habit to get into.<\/li>\n \t
    5. The Browser bar displays current file's hierarchical<\/li>\n \t
    6. The Status bar, located across the bottom of the Graphic window, is a very important part of the operator's day-to-day work in Inventor.<\/li>\n \t
    7. Inventor must be instructed to end the current command. There are two methods available to do this. The first is to press the Esc key on the keyboard and the second is to click Cancel or Done on the right-click menu.<\/li>\n<\/ol>\n<\/div>\n<\/div>","rendered":"
      \n
      \n

      Learning Outcomes<\/p>\n<\/header>\n

      \n

      When you have completed this module, you will be able to:<\/p>\n

        \n
      1. Describe template files, part files, sketches, and 3D solid models.<\/li>\n
      2. Describe and configure Inventor\u2019s user interface, its menus, and use of the mouse.<\/li>\n
      3. Apply the NEW, SAVE, and CLOSE commands to create a new part file using a template plus name, save, and close a file.<\/li>\n<\/ol>\n<\/div>\n<\/div>\n

        Inventor\u2019s Graphic Window<\/h1>\n

        When a file is active, Inventor will display the Graphic window. The Graphic window has two different modes, the Sketch mode and the Model mode. The Sketch mode<\/span> <\/em>is used to create and edit 2D sketches that are then extruded or revolved to create 3D solid models. The Model mode <\/em><\/span>is used to view, manipulate and modify 3D solid models. You can switch between these two modes to construct or edit and create the solid model. The mode that is currently displayed is called the current mode. The Model mode must be the current mode to save the file.<\/p>\n

        A 3D Solid Model<\/h2>\n

        A 3D solid model<\/span><\/em>, Figure 2-1, is the best possible computerized representation of a real object. A solid model can be colored or rendered plus the mass properties can be obtained from it. Mass properties are attributes such as volume, weight, surface area, moments of inertia, and centre of gravity. They are taught in Module 20.<\/p>\n

        \"\"
        Figure 2-1
        A 3D Solid Model<\/figcaption><\/figure>\n

        An Inventor File<\/h2>\n

        Regardless of the type of files that are created using Inventor, they are called files as compared to files created on a CAD system which are typically called drawings. A file<\/span> <\/em>can be a 3D solid model (called a part), an assembly, a presentation, or a drawing created in Inventor and saved in digital format. The four types of files, taught in this book, that Inventor can create and save are part files, assembly files, presentation files, and drawing files.<\/p>\n

        A Part File<\/h2>\n

        A part<\/span> <\/em>file is one 3D solid model. A part file has the file extension .ipt which is an acronym for Inventor ParT. A part file can be used on its own, used to create a working drawing, used as part of an assembly file, or used as part of a presentation file. Assembly and presentation files are taught in Module 21 to Module 26.<\/p>\n

        Starting a New File<\/h2>\n

        A new file is started using the NEW command. The NEW command forces you to select the template file that will be used to create the new file. Every new Inventor file must be created from an existing template file. The file currently being editing in Inventor is called the current file <\/em><\/span>or sometimes the active file<\/em><\/span>.<\/p>\n

        Templates<\/h2>\n

        A template<\/span> <\/em>file is simply an Inventor file, set with the desired parameters by its creator, named, and saved. As part of the Inventor book there are two distinct sets of templates provided. One set is in english units and the other set is in metric units. The English templates use the base unit of inches and the metric templates use the base unit of millimeters. Template files can also contain modelling objects so that several similar parts can easily be started from a common pre-built unit.<\/p>\n

        Saving Files<\/h2>\n

        Inventor keeps the current file in RAM memory. If the computer cashes or the power fails while the operator is working on a file, all the work on the file, since the last time it was saved, will be lost. When the file is saved it saves the current file that is in RAM memory onto the disk drive.<\/p>\n

        Ensure that the current file is saved frequently to avoid losing production time. You should get into the habit of saving the current file every 5 to 10 minutes.<\/p>\n

        \n
        \n

        Inventor Command:\u00a0 NEW<\/p>\n<\/header>\n

        \n

        The NEW command is used to start a new file.<\/p>\n

        \"\"<\/p>\n<\/div>\n<\/div>\n

        \n
        \n

        Inventor Command:\u00a0SAVE<\/p>\n<\/header>\n

        \n

        The SAVE command is used to save the current file from RAM memory onto the disk drive.<\/p>\n

        Shortcut: CTRL-S<\/strong><\/p>\n

        \"\"<\/p>\n<\/div>\n<\/div>\n

        \n
        \n

        Inventor Command: CLOSE<\/p>\n<\/header>\n

        \n

        The CLOSE command is used to close the current file.<\/p>\n

        Shortcut: None<\/strong><\/p>\n

        \"\"<\/p>\n<\/div>\n<\/div>\n

        Inventor\u2019s Menus<\/h2>\n

        Inventor has many different menus that are used by you to give instructions to Inventor while constructing and editing files. The Inventor menus taught in the Inventor book are the Pull-down menu, the Ribbon menu, the Quick Access toolbar, the Browser bar, and the Right-click menu.<\/p>\n

        Inventor’s Pull-Down Menu<\/h2>\n

        To pull down Inventor’s Pull-down menu, click the File tab. If the pull down menu item has a small solid triangle at the end, it has a flyout<\/span> <\/em>menu associated with it. If you move the cursor on the triangle, the flyout menu will display. See Figure 2-2.<\/p>\n

        \"\"
        Figure 2-2
        The Pull-Down Menu<\/figcaption><\/figure>\n

        Ribbon Menu<\/h2>\n

        The Ribbon menu is used for most of your work in Inventor. See Figure 2-3.<\/p>\n

        \"\"
        Figure 2-3
        A Typical Ribbon Menu<\/figcaption><\/figure>\n

        Browser Bar<\/h2>\n

        The Browser bar <\/em><\/span>displays the hierarchical structure of the model or assembly of the current file. It is your most important and most-used tool to create and modify objects within files. The Browser bar will be taught in more detail in future modules. It is normally docked on the left side of the Graphic window. See Figure 2-4.<\/p>\n

        \"\"
        Figure 2-4
        Browser Bar<\/figcaption><\/figure>\n
        \"\"
        Figure 2-5 Right-click Menu<\/figcaption><\/figure>\n

        Right-Click Menu<\/h2>\n

        When the right mouse button is clicked, it displays the Right-click menu<\/em><\/span>. See Figure 2-5. It is sometimes called the Cursor menu <\/em><\/span>since it displays at the current location of the cursor. This menu changes automatically depending on the current command or operation being performed. It usually takes the new user a bit of time to get used to using this menu.<\/p>\n

        Status Bar<\/h2>\n

        The Status<\/span> bar<\/span><\/em> is permanently located along the bottom of the Graphic window. It displays the prompts that the current command is issuing, as shown in Figure 2-6, as well as the coordinate locations, as shown in Figure 2-7. These prompts help you understand what information Inventor requires and the cursor location, length, and angle in the current command.<\/p>\n

        \"\"
        Figure 2-6\u00a0 Status Bar – Showing a Command
        Prompt.<\/figcaption><\/figure>\n
        \"\"
        Figure 2-7 Status Bar – Showing Coordinate
        Information<\/figcaption><\/figure>\n

        The Graphic Cursor<\/h2>\n

        The Graphic cursor <\/em><\/span>is used to select menu items or objects on the sketch or model. See Figure 2-8.<\/p>\n

        \"\"
        Figure 2-8
        The Graphic Cursor<\/figcaption><\/figure>\n

        Dialogue Boxes<\/h2>\n

        Inventor commands use many different dialogue boxes to obtain information to be used by the command or current operation. A typical dialogue box is shown in Figure 2-9.<\/p>\n

        \"\"
        Figure 2-9 A Typical Dialogue Box<\/figcaption><\/figure>\n

        The Mouse<\/h2>\n

        Inventor is programed to use the three buttons on the mouse as follows:<\/p>\n

        Left Button:\u00a0 <\/strong>This is the pick button. Use it to pick objects, pick menu items, or select locations on the sketch or model.<\/p>\n

        Middle Button:\u00a0 <\/strong>The middle button or the wheel is used to zoom and pan around the Graphic window. This will be discussed in detail in Module 3.<\/p>\n

        Right Button:\u00a0 <\/strong>The right button displays the Right-click menu. See Figure 2-10. The Right-click menu will change depending on the current command or operation being preformed. It is a very helpful menu and should be used as often as possible when working in Inventor.<\/p>\n

        Inventor Commands<\/h2>\n

        An Inventor command<\/span> <\/em>is an instruction from you to Inventor instructing it what operation to perform. Commands can be entered by selecting an item from a Pull-down menu, a Right-click menu, an icon on a Toolbar, an item on the Panel menu, or entering a shortcut on the keyboard. Since there are usually many different ways of entering the same command, you should select the method that works the best for you. There is no right or wrong way to enter a command. You should experiment to find the fastest method to improve your drawing speed and productivity.<\/p>\n

        Ending the Current Command<\/h2>\n

        When you enter a command, it becomes the current command <\/em><\/span>or sometimes called the active command<\/span><\/em>. Inventor must be instructed to end the current command. There are two methods available to do this. The first is to press the Esc key on the keyboard and the second is click to Done or Cancel on the Right-click menu as shown in Figure 2-10.<\/p>\n

        \"\"
        Figure 2-10 Ending a Command<\/figcaption><\/figure>\n

        Undo and Redo Commands<\/h2>\n

        In the current file, any Inventor command or commands can be undone to reverse any changes that they may have made. To do this, click the Undo icon in the Quick Access toolbar as shown in Figure 2-11. Each click will undo the previous step. If the Undo icon was used to undo a command or a series of commands, it can be reversed by clicking the Redo icon. See Figure 2-12.<\/p>\n

        \"\"
        Fig 2-11 Undo Icon<\/figcaption><\/figure>\n
        \"\"
        Fig 2-11 Redo Icon<\/figcaption><\/figure>\n

        WORK ALONG: Creating and Saving a Part File<\/h1>\n

        Step 1<\/h2>\n

        Start Inventor and check the current project. If required, set it to Inventor Course. (Figure Step 1)<\/p>\n

        \"\"
        Figure Step 1<\/figcaption><\/figure>\n

        Step 2<\/h2>\n

        Click the NEW command icon in the upper left corner of the screen or under the File tab. In the Create New File dialogue box, enable the folder: Templates – English<\/span>. (Figure Step 2A and 2B)<\/p>\n

        \"\"
        Figure Step 2A<\/figcaption><\/figure>\n
        \"\"
        Figure Step 2B<\/figcaption><\/figure>\n
        AUTHOR’S COMMENTS: <\/strong>If the Create New File dialogue box does not display template files where all the names begin with Modules (i.e. Modules Part (in).ipt), stop this workalong and go back and redo Module 1.<\/div>\n

        Step 3<\/h2>\n

        Select the template: Modules Part (in).ipt<\/span> icon and click OK. (Figure Step 3)<\/p>\n

        \"\"
        Figure Step 3<\/figcaption><\/figure>\n

        Step 4<\/h2>\n

        Inventor will display the Graphic window, in Sketch mode, as shown in the figure. (Figure Step 4)<\/p>\n

        \"\"<\/a>
        Figure Step 4 [Click to see image full size]<\/figcaption><\/figure>\n

        Step 5<\/h2>\n

        Click the Finish Sketch icon to change to Model mode. (Figure Step 5A and 5B)<\/p>\n

        \"\"
        Figure Step 5A<\/figcaption><\/figure>\n
        \"\"<\/a>
        Figure Step 5B [Click to see image full size]<\/figcaption><\/figure>\n

        Step 6<\/h2>\n

        Click the Save icon. It will open the Save As dialogue box. In the File name: box, enter the name: Inventor Workalong 02-1<\/span> and click Save. (Figure Step 6A and 6B)<\/p>\n

        \"\"
        Figure Step 6A<\/figcaption><\/figure>\n
        \"\"<\/a>
        Figure Step 6B [Click to see image full size]<\/figcaption><\/figure>\n
        AUTHOR’S COMMENTS: <\/strong>Ensure that the Save in: box displays the folder Lab Exercises. If it does not, check to ensure that the current project is set to Inventor Course<\/div>\n

        Step 7<\/h2>\n

        The file name should now display on top bar of the Graphic window similar to what is shown in the figure. (Figure Step 7)<\/p>\n

        \"\"
        Figure Step 7<\/figcaption><\/figure>\n

        Step 8<\/h2>\n

        Click the File <\/em>tab and then the Close <\/em>icon to close the current part file. (Figure Step 8)<\/p>\n

        \"\"
        Figure Step 8<\/figcaption><\/figure>\n

        Step 9<\/h2>\n

        Click the Inventor icon to pull down the menu. On the Pull-down menu, click Exit Autodesk Inventor Professional <\/em>to exit Inventor. (Figure Step 9)<\/p>\n

        \"\"
        Figure Step 9<\/figcaption><\/figure>\n

        WORK ALONG: Configuring and Working with Inventor’s Interface<\/h1>\n

        Step 1<\/h2>\n

        Start Inventor and check the current project. If required, set it to Inventor Course.<\/p>\n

        Step 2<\/h2>\n

        Click the New icon. In the New File dialogue box, enable the folder: Metric Templates<\/span>.<\/p>\n

        Step 3<\/h2>\n

        Select the template: Module Part (mm).ipt<\/span>. (Figure Step 3)<\/p>\n

        \"\"
        Figure Step 3<\/figcaption><\/figure>\n
        AUTHOR’S COMMENTS:\u00a0<\/strong>The units for this part are millimeters.<\/div>\n

        Step 4<\/h2>\n

        Click Finish Sketch to exit Sketch mode. While in Model mode, save the part file with the name: Inventor Workalong 02-2<\/span>. (Figure Step 4)<\/p>\n

        \"\"<\/a>
        Figure Step 4 [Click to see image full size]<\/figcaption><\/figure>\n
        AUTHOR’S COMMENTS:\u00a0<\/strong>You must be in Model mode to save the current part file.<\/div>\n

        Step 5<\/h2>\n

        Move the cursor onto the space between the plus (+) sign and the magnifying glass at the top of the Browser bar and press and hold the left mouse button down. While holding the button down, drag the Browser bar into the Graphic window. The Graphic window should appear similar to the figure. (Figure Step 5)<\/p>\n

        \"\"<\/a>
        Figure Step 5 [Click to see image full size]<\/figcaption><\/figure>\n
        AUTHOR’S COMMENTS:\u00a0<\/strong>I had you do Step 5 to show you how to undock and move the Browser bar onto the Graphic window. When you do this, it is called a floating menu. When it is attached to one of the four sides, it is called a docked menu.<\/div>\n
        USER TIP: <\/strong>The Status bar displays Inventor prompts to the you. Watch it closely as it will display what information the current command is looking for from you or coordinate information of the current cursor location.<\/div>\n

        Step 6<\/h2>\n

        Move the cursor onto the space between the plus (+) sign and the magnifying glass at the top of the Browser bar and press and hold the left mouse button down. While holding the button down, drag the Browser bar to the left until its colors fade. Release the left mouse button and the browser bar will dock on the left edge of the screen. (Figure Step 6)<\/p>\n

        \"\"<\/a>
        Figure Step 6 [Click to see image full size]<\/figcaption><\/figure>\n
        AUTHOR’S COMMENTS:\u00a0 <\/strong>You may have to practice docking and undocking the menu and moving them around the Graphic window until you get comfortable doing it. The Graphic window configuration shown in Figure Step 6 is the one I use when working in Inventor. I suggest thatyou use it while working on the workalongs and lab exercises in the Inventor book.<\/div>\n
        \n

        MUST KNOW: <\/strong>Either the Esc key on the keyboard or the Cancel on the Right-click menu must be used to end the current command. You must always let Inventor know when to terminate the current command.<\/p>\n

        \"\"<\/p>\n<\/div>\n

        Step 7<\/h2>\n

        Click Sketch1 in the Browser bar to select it and right click the mouse. In the Right-click menu, click Edit Sketch. (Figure Step 7)<\/p>\n

        \"\"
        Figure Step 7<\/figcaption><\/figure>\n

        Step 8<\/h2>\n

        The Graphic window will change to Sketch mode and should appear similar to the figure. (Figure step 8)<\/p>\n

        \"\"<\/a>
        Figure Step 8 [Click to see image full size]<\/figcaption><\/figure>\n

        Step 9<\/h2>\n

        Change to Model mode. Save and close the part file.<\/p>\n

        \n

        MUST KNOW: <\/strong>The Browser bar displays the hierarchical structure of the model or assembly of the current file. It is your most important and most-used tool to create and modify files.<\/p>\n

        \"\"<\/p>\n<\/div>\n

        MUST KNOW: <\/strong>A part file is one 3D solid model. A part file has the file extension .ipt. The extension .ipt is an acronym for Inventor ParT. Working drawings can be created from the part file or part of an assembly or presentation file.<\/div>\n

        Key Principles<\/h1>\n
        \n
        \n

        Key Principles in Module 2<\/p>\n<\/header>\n

        \n
          \n
        1. When a file is active, Inventor will display the Graphic window. The Graphic window has two different modes, the Sketch mode and the Model mode. They are used to create 3D solid models, called<\/li>\n
        2. A part file is one 3D solid model. A part file has the file extension .ipt. The file extension .ipt is an acronym for Inventor ParT. Working drawings can be created from the part file or part of an assembly or presentation file.<\/li>\n
        3. Every new Inventor file must be created from an existing template<\/li>\n
        4. Inventor keeps the current file in RAM memory. If the computer cashes or the power fails, all the work on the file, since the last time it was saved, will be lost. When the file is saved, Inventor saves what is in RAM memory onto the disk drive. Ensure that the current file is saved frequently to avoid losing production Saving it every 5 to 10 minutes is a good habit to get into.<\/li>\n
        5. The Browser bar displays current file’s hierarchical<\/li>\n
        6. The Status bar, located across the bottom of the Graphic window, is a very important part of the operator’s day-to-day work in Inventor.<\/li>\n
        7. Inventor must be instructed to end the current command. There are two methods available to do this. The first is to press the Esc key on the keyboard and the second is to click Cancel or Done on the right-click menu.<\/li>\n<\/ol>\n<\/div>\n<\/div>\n","protected":false},"author":127,"menu_order":2,"template":"","meta":{"pb_show_title":"on","pb_short_title":"","pb_subtitle":"","pb_authors":[],"pb_section_license":""},"chapter-type":[],"contributor":[],"license":[],"class_list":["post-98","chapter","type-chapter","status-publish","hentry"],"part":40,"_links":{"self":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapters\/98","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapters"}],"about":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/wp\/v2\/types\/chapter"}],"author":[{"embeddable":true,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/wp\/v2\/users\/127"}],"version-history":[{"count":1,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapters\/98\/revisions"}],"predecessor-version":[{"id":99,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapters\/98\/revisions\/99"}],"part":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/parts\/40"}],"metadata":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapters\/98\/metadata\/"}],"wp:attachment":[{"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/wp\/v2\/media?parent=98"}],"wp:term":[{"taxonomy":"chapter-type","embeddable":true,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/pressbooks\/v2\/chapter-type?post=98"},{"taxonomy":"contributor","embeddable":true,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/wp\/v2\/contributor?post=98"},{"taxonomy":"license","embeddable":true,"href":"https:\/\/opentextbc.ca\/autodesk\/wp-json\/wp\/v2\/license?post=98"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}